Banks Power 13-18 Ram 6.7L Diesel Boost Tube System – Driver Side

OEM replacement for left side boost tube (Driver side, Cold side) with silicone couplers. 67% greater flow area compared to stock. Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. More density maintained from turbo to intake. This boost tube is designed for serious horsepower. Banks cold side tube has up to 67% greater flow area than stock tube. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster. Key Features: Works with stock or aftermarket intercooler with stock outlet size and location. 67% Greater cold side flow area than stock (3.5in vs 2.75in). Direct replacement for left side Boost-Tube (Driver/Cold side). Combine with Banks Monster Ram Gen 2 for the most power. Designed to give you a greater cooling capacity. Mandrel-bent aluminized steel construction. Constant diameter tubing for the best flow. 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Increase performance and lower EGTs. Red powder-coated or Natural finish, ready for paint. Perfect fit and finish
Boost Tube Upgrade Kit, Red powder-coated (Driver, Cold Side only) for 2013-2018 Ram 2500/3500 6.7L Cummins
This kit is designed to work with stock elbow or new Banks Monster-Ram (3.5″ or 4″) and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

• Up to 67% greater flow area vs stock. Spools turbo faster with lower EGTs
• Tube Has 2.375 in. Reduction

Fitment:
Ram 2500 Big Horn 2013 to 2018
Ram 2500 Laramie 2013 to 2018
Ram 2500 Laramie Limited 2014 to 2015
Ram 2500 Laramie Longhorn 2013 to 2018
Ram 2500 Limited 2016 to 2018
Ram 2500 Lone Star 2013 to 2015
Ram 2500 Outdoorsman 2013 to 2016
Ram 2500 SLT 2013 to 2018
Ram 2500 ST 2013
Ram 2500 Tradesman 2013 to 2018
Ram 3500 Big Horn 2013 to 2018
Ram 3500 Laramie 2013 to 2018
Ram 3500 Laramie Limited 2014 to 2015
Ram 3500 Laramie Longhorn 2013 to 2018
Ram 3500 Limited 2016 to 2018
Ram 3500 Lone Star 2013 to 2015
Ram 3500 Lone Star 2017
Ram 3500 SLT 2013 to 2018
Ram 3500 ST 2013
Ram 3500 Tradesman 2013 to 2018