Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
4in. REAR SPRG;03-09 DGE 2500
- Load Capacity Will Be Equal or Greater Than OE
- Constructed As Progressive Multileaf Packs
- Limited Lifetime Warranty
- Made With American Steel
Fitment:
Dodge Ram 2500 Laramie 2006 to 2010
Dodge Ram 2500 SLT 2006 to 2010
Dodge Ram 2500 SXT 2008 to 2010
Dodge Ram 2500 TRX 2010
Dodge Ram 3500 Laramie 2006 to 2010
Dodge Ram 3500 SLT 2006 to 2010
Dodge Ram 3500 SXT 2009
Ram 2500 Laramie 2011 to 2012
Ram 2500 Laramie Longhorn 2011 to 2012
Ram 2500 Outdoorsman 2012
Ram 2500 Power Wagon 2012
Ram 2500 SLT 2011 to 2012
Ram 2500 ST 2011 to 2012
Ram 3500 Laramie 2011 to 2012
Ram 3500 Laramie Longhorn 2011 to 2012
Ram 3500 SLT 2011 to 2012
Ram 3500 ST 2011 to 2012
Reviews
There are no reviews yet